Uit Hack42
Ga naar: navigatie, zoeken
Regel 74: Regel 74:
  
 
Note. Its better to view the files on a PC, so you can zoom in and out.
 
Note. Its better to view the files on a PC, so you can zoom in and out.
 +
 +
 +
= Introduction =
 +
 +
The programma 101 incorporates new experiences in the tradition of Olivetti (Ivrea).
 +
It was founded in 1965 by the integration of the emerging electronics with the refined
 +
mechanics, which at the time saw the first Electronic Laboratory reside in Pregnana
 +
Milanese (MI) and the second in Ivrea.
 +
Project leader was the late Ing. Pier Giorgio Perotto, hence the
 +
nickname "Perottina".
 +
 +
To understand the structure and algorithms of the Programma 101 one should be aware of the state of
 +
technology and relative costs of production in the years 1962-65, the developement period of his project.
 +
Logical technology is the Resistor-Transistor-Logic (RTL) Transistors, diodes, resistors and capacitors are not integrated yet.
 +
''Nel 1960 , l’Elea primo grande calcolatore a transistor, aveva i componenti montati su piastrini i quali a loro volta inseriti in “pacchi”. Pacchi e piastrini erano connessi per mezzo di filature.''
 +
In the standard NOR, used by P101, a register connected to the shift of 8 bits,
 +
needed at least 36 micro-modules with relative printed circuits micro, plus:

Versie van 31 dec 2014 16:01

The italian version is on the discussions page ^. open it in another browser tab to have this one side by side with the Italian version.

The idea is to translate it by heading and building it up as it goes. Italian phrases in italics (sic) are not translated yet.

Documentation and support tools

The description in the object is the result of the use of:

  • A Real Programma 101 of Museum Tecnologic@mente.
  • Original Function diagrams of the Programma 101.
  • Data base.
  • CAD simulator on PC.

All documentation, including logic diagrams of the machine translated and simulated and the supporting material, is in electronic format and are available at the Museo – Laboratorio Tecnologic@mente of Ivrea.

The understanding of this document is facilitated by the knowledge and use of all of the documentation and the simulator.

The description shows the result of simulation CAD diagrams of the functions described. The machine is simulated to all effects a translation of 1: 1 of a real P101. The "translation" was needed to adapt the technology, the P101 uses Resistor Transistor Logic (RTL), the simulator Diode Transistor Logic (DTL). Non è stata simulata la logica relativa alle segnalazioni di errore.

The simulated machine does not use the same logical components of P101, wich uses inverted logic: a TRUE is LOW and FALSE is HIGH. The main difference between P101 and simulator, is the working of the a flip flop. In the P101 masks are used in circuits without a transistor, which switch the flip flop at the falling edge of the signal. The simulator, on the other hand, uses logic gates working with on the signal level, mostly the rising edge.

In order to minimize the execution time of the simulation, the simulator follows the sequence of events but not the absolute values of the times of the P101. The names of the logic signals, used in the simulated machine, have the same meaning as those of the real P101. The difference between NOR logic (P101) and NAND (simulator), implies that the same function can be shown on the diagram in inverted form. In order to make it easier to read the printed symbol, the simulator uses a log to view binary code, OU [3: 0], not present in the P101. To present parallel data paths in the diagrams, the simulator uses the root of the name of the signal and exchanges a letter with a numerical value. For this reason, for example, the registers:

P101 Simulatore
HH – HA H[7:0].
HK – HM C[2:0].
AA – AF A[5:0].
... ...


Technical functional Documentation

The following documents for the family P101, P102, P203 are currently available in electronic format:

  • Manuale di programmazione P101
  • P102 - P203 Connettore 50 contatti
  • P203 Addendum descrizione tecnica
  • Fogli logici :
    • Fogli Logici P101
    • Fogli Logici P102
    • Fogli Logici P203
  • Legenda dei fogli logici.doc
  • Raccolta Circuiti Elettrici.doc
  • CAD e Simulatore P101.doc

Documentation Buildup

This documentation is structured in an Access database (already equipped with query and macro) and related data to be imported.

The material is all inside the folder "DB Source", and to use it you must follow the instructions described in the "Introduction to DB P101".

The folder contains:

  • File Database for the Programma 101 family models
  • P101.mdb
  • P102.mdb
  • P203.mdb
  • Tables of special machines containing the complete list of signal generators
  • P101 – T1 Segnali.xls
  • P102 – T1 Segnali.xls
  • P203 – T1 Segnali.xls

Note. Its better to view the files on a PC, so you can zoom in and out.


Introduction

The programma 101 incorporates new experiences in the tradition of Olivetti (Ivrea). It was founded in 1965 by the integration of the emerging electronics with the refined mechanics, which at the time saw the first Electronic Laboratory reside in Pregnana Milanese (MI) and the second in Ivrea. Project leader was the late Ing. Pier Giorgio Perotto, hence the nickname "Perottina".

To understand the structure and algorithms of the Programma 101 one should be aware of the state of technology and relative costs of production in the years 1962-65, the developement period of his project. Logical technology is the Resistor-Transistor-Logic (RTL) Transistors, diodes, resistors and capacitors are not integrated yet. Nel 1960 , l’Elea primo grande calcolatore a transistor, aveva i componenti montati su piastrini i quali a loro volta inseriti in “pacchi”. Pacchi e piastrini erano connessi per mezzo di filature. In the standard NOR, used by P101, a register connected to the shift of 8 bits, needed at least 36 micro-modules with relative printed circuits micro, plus: