Uit Hack42
Ga naar: navigatie, zoeken
k (Grammar)
Regel 1: Regel 1:
 
{{Project
 
{{Project
|Naam=repair Olivetti Programma 101
+
|Naam=Repair Olivetti Programma 101
 
|Eigenaar=MacSimski,  
 
|Eigenaar=MacSimski,  
 
|Status=Uitvoer
 
|Status=Uitvoer
 
|Skills=mechanics, electronics, temper control
 
|Skills=mechanics, electronics, temper control
|Samenvatting=The attempt to restore a Programma 101 to working order
+
|Samenvatting=Attempt to restore a Programma 101 to working order
 
}}
 
}}
Our Olivetti Programma 101 has been sitting idle in a cellar for at least 10 years. Because of the way the machine is build and its age, all the mechanical parts have gummed up. Grease and oil have turned into goo, including the various belts. so checking and fixing the machine is only possible after thorough cleaning and lubricating the machine and providing new belts. Only then are we able to check if there is something wrong with the electronics of this calculator.
 
  
==Mechanics==
+
Our '''Olivetti Programma 101''' has been sitting idle in a cellar for at least 10 years. Because of the way the machine is built and its age, all the mechanical parts have gummed up. Grease and oil have turned into a tough goo and the various belts have deteriorated. Checking and fixing the machine is only possible after a thorough cleaning, application of fresh lubricating agents and replacement of all the belts. Afterwards, we will be able to proceed with checking the electronics of this calculator.
The mechanics is divided into some assemblies, fixed to each other and the chassis with sometimes hard to reach screws. It is the earliest known instance of a RISC processor ("Reversed Italian Screw Construction"). Where you would expect to find the head of the screw, you find the other end. So for some screws you need to stick a very long screwdriver completely through the assembly to reach it.
 
  
The units are:
+
== Mechanics ==
 +
The mechanics are divided into some assemblies, fixed to each other and the chassis with sometimes hard to reach screws. It is the earliest known instance of a RISC processor ("Reversed Italian Screw Construction"). Where you would expect to find the head of the screw, you find the other end instead. So for some screws you need to stick a very long screwdriver completely through the assembly to reach it.
  
# the keyboard assembly.
+
The major units are:
# the printer assembly.
+
 
# the servo assembly
+
# Keyboard assembly.
# the card reader assembly.
+
# Printer assembly.
# the motor.
+
# Servo assembly
# the main cooling fan.
+
# Card reader assembly.
 +
# Motor.
 +
# Main cooling fan.

Versie van 12 apr 2014 10:23

Project: Repair Olivetti Programma 101
Schroefje24.png
Schroefje24.png
Schroefje24.png
Schroefje24.png
NoProjectPicture.jpg

Repair Olivetti Programma 101

Naam Repair Olivetti Programma 101
Door MacSimski
Status Uitvoer
Madskillz mechanics, electronics, temper control
Doel / Omschrijving
Attempt to restore a Programma 101 to working order
Alle Projecten - Project Toevoegen

Add your picture plz.


Our Olivetti Programma 101 has been sitting idle in a cellar for at least 10 years. Because of the way the machine is built and its age, all the mechanical parts have gummed up. Grease and oil have turned into a tough goo and the various belts have deteriorated. Checking and fixing the machine is only possible after a thorough cleaning, application of fresh lubricating agents and replacement of all the belts. Afterwards, we will be able to proceed with checking the electronics of this calculator.

Mechanics

The mechanics are divided into some assemblies, fixed to each other and the chassis with sometimes hard to reach screws. It is the earliest known instance of a RISC processor ("Reversed Italian Screw Construction"). Where you would expect to find the head of the screw, you find the other end instead. So for some screws you need to stick a very long screwdriver completely through the assembly to reach it.

The major units are:

  1. Keyboard assembly.
  2. Printer assembly.
  3. Servo assembly
  4. Card reader assembly.
  5. Motor.
  6. Main cooling fan.