Uit Hack42
Versie door Denz (overleg | bijdragen) op 26 aug 2014 om 15:05
Ga naar: navigatie, zoeken
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Server: Origin 2000
Rubriek Het Museum
Fabrikant SGI
SGI logo.png
Model Origin 2000
Naam Origin 2000
Type Server
Serial#
Systeem
Architectuur MIPS
Systeembus/interface
OS IRIX
Netwerk
Hostname
IP Address
DECnet Address
MAC Address
Collectiegegevens
Eigenaar Hack42
Status Werkend
Knowhow
Locatie Het Museum
Label
Herkomst DnD
Datum opname collectie
Bekijk alle hardware - Ga naar het Museum - Nieuw item
  • Deskside server
  • 8 CPU's (195 MHz MIPS R10000)
  • 2048 Mbyte RAM
  • 2 Harddusks (9 Gbyte en 300 Gbyte)
  • CDROM speler

De machine start op (console port op de achterkant, 9600,n,8,1)

IP27 PROM SGI Version 6.94  built 04:00:43 PM Dec  5, 2001
Testing/Initializing memory ...............		DONE
Copying PROM code to memory ...............		DONE
Discovering local IO ......................		DONE
Discovering NUMAlink connectivity .........		DONE
Found 6 objects (4 hubs, 2 routers) in 66521 usec
Waiting for peers to complete discovery....		DONE
Global master is /hw/module/1/slot/n1
Testing/Initializing all memory ...........		DONE
waiting for node with nic 1303e3 at module 1 slot 2 at global barrier.........
Checking partitioning information .........		DONE
Loading BASEIO prom .......................		DONE

BASEIO PROM Monitor SGI Version 6.94  built 03:59:15 PM Dec  5, 2001 (BE64)
8 CPUs on 4 nodes found.
Installing PROM Device drivers ............             

Walking SCSI Adapter 0 (/hw/module/1/slot/io1), (pci id 0)
1+ 2- 3- 4+ 5- 6+ 7- 8- 9- 10- 11- 12- 13- 14- 15- = 3 device(s)


Walking SCSI Adapter 1 (/hw/module/1/slot/io1), (pci id 1)
1- 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 0 device(s)

Initializing PROM Device drivers ..........             DONE
Checking hardware inventory ...............              
***Warning: Found a different board in module 1, slot n1,
Previous barcode was DWJ073, New barcode is K0004230

***Warning: Found a different board in module 1, slot n2,
Previous barcode was DWJ798, New barcode is DWJ073

***Warning: Found a different board in module 1, slot n3,
Previous barcode was DPL519, New barcode is DWX943

***Warning: Found a different board in module 1, slot n4,
Previous barcode was DWX943, New barcode is DPL519
DONE

**** System Configuration and Diagnostics Summary ****
CONFIG:
         No. of NODEs enabled    = 4
         No. of NODEs disabled   = 0
         No. of CPUs enabled     = 8
         No. of CPUs disabled    = 0
         Mem enabled             = 2048 MB
         Mem disabled            = 0 MB
         No. of RTRs enabled     = 2
         No. of RTRs disabled    = 0

DIAG RESULTS:
         ALL DIAGS PASSED.
**** End System Configuration and Diagnostics Summary ****


System Maintenance Menu

1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor

Option? 3


            Diagnostic program not supported in this configuration.



System Maintenance Menu

1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor

Option? 5
Command Monitor.  Type "exit" to return to the menu.

>> hinv
System  SGI-IP27
8 195 MHz IP27 Processors
Main memory size: 2048 Mbytes
Integral SCSI controller 0
Integral SCSI controller 1
Integral Fast Ethernet
IOC3 serial port
    Disk drive: unit 1 on SCSI Controller 0, (dksc(0,1,0))
    Disk drive: unit 4 on SCSI Controller 0, (dksc(0,4,0))
    CDROM: unit 6 on SCSI Controller 0, (cdrom(0,6,7))
>> boot
896+111384+16725+3832 entry: 0xa8000000012a6d68
Standalone Shell SGI Version 6.5 ARCS   Jan  8, 2002 (64 Bit)
sash: hinv -v
IP27 Node Board, Module 1, Slot n1
    ASIC HUB Rev 3, 97.5 MHz, (nasid 0)
    Processor A: 195 MHz R10000 Rev 2.6
          Secondary Cache 4MB 130MHz  Tap 0x9 , (cpu 0)
      R10010FPC Rev 2.6
    Processor B: 195 MHz R10000 Rev 2.6
          Secondary Cache 4MB 130MHz  Tap 0x9 , (cpu 1)
      R10010FPC Rev 2.6
    Memory on board, 320 MBytes (Standard)
      Bank 0, 64 MBytes (Standard)  <-- (Software Bank 0) 
      Bank 1, 128 MBytes (Standard) 
      Bank 2, 128 MBytes (Standard) 
IP27 Node Board, Module 1, Slot n2
    ASIC HUB Rev 3, 97.5 MHz, (nasid 1)
    Processor A: 195 MHz R10000 Rev 2.6
          Secondary Cache 4MB 130MHz  Tap 0x9 , (cpu 2)
      R10010FPC Rev 2.6
    Processor B: 195 MHz R10000 Rev 2.6
          Secondary Cache 4MB 130MHz  Tap 0x9 , (cpu 3)
      R10010FPC Rev 2.6
    Memory on board, 704 MBytes (Standard)
      Bank 0, 64 MBytes (Standard)  <-- (Software Bank 0) 
      Bank 1, 128 MBytes (Standard) 
      Bank 2, 512 MBytes (Standard) 
IP27 Node Board, Module 1, Slot n3
    ASIC HUB Rev 3, 97.5 MHz, (nasid 2)
    Processor A: 195 MHz R10000 Rev 2.6
          Secondary Cache 4MB 130MHz  Tap 0x9 , (cpu 4)
      R10010FPC Rev 2.6
    Processor B: 195 MHz R10000 Rev 2.6
          Secondary Cache 4MB 130MHz  Tap 0x9 , (cpu 5)
      R10010FPC Rev 2.6
    Memory on board, 320 MBytes (Standard)
      Bank 0, 64 MBytes (Standard)  <-- (Software Bank 0) 
      Bank 1, 128 MBytes (Standard) 
      Bank 2, 128 MBytes (Standard) 
IP27 Node Board, Module 1, Slot n4
    ASIC HUB Rev 5, 97.5 MHz, (nasid 3)
    Processor A: 195 MHz R10000 Rev 2.6
          Secondary Cache 4MB 130MHz  Tap 0x9 , (cpu 6)
      R10010FPC Rev 2.6
    Processor B: 195 MHz R10000 Rev 2.6
          Secondary Cache 4MB 130MHz  Tap 0x9 , (cpu 7)
      R10010FPC Rev 2.6
    Memory on board, 704 MBytes (Standard)
      Bank 0, 64 MBytes (Standard)  <-- (Software Bank 0) 
      Bank 1, 128 MBytes (Standard) 
      Bank 2, 512 MBytes (Standard) 
BASEIO IO Board, Module 1, Slot io1
    ASIC BRIDGE Rev 3, (widget 8)
    adapter PCI-SCSI Rev 5, (pci id 0)
        peripheral SCSI DISK, ID 1, SGI IBM DNES-309170Y
        peripheral SCSI DISK, ID 4, FUJITSU MAT3300NC
        peripheral SCSI CDROM, ID 6, TOSHIBA CD-ROM XM-5401TA
    adapter PCI-SCSI Rev 5, (pci id 1)
    adapter IOC3 Rev 1, (pci id 2)
        controller multi function SuperIO
        controller Ethernet Rev 1
ASIC ROUTER , Module 1, Slot r1 (nasid 1)
ASIC ROUTER , Module 1, Slot r2 (nasid 3)
ASIC XBOW Rev 2, on midplane of Module 1
MIDPLANE, Module 1 Frequency 390 MHz
ASIC XBOW Rev 2, on midplane of Module 1
sash: boot
3741493+813256+765232 entry: 0xa80000000001a510
IRIX Release 6.5 IP27 Version 01091821 System V - 64 Bit
Copyright 1987-2002 Silicon Graphics, Inc.
All Rights Reserved.

Setting rbaud to 19200
The system is coming up.

WARNING: ef0: link fail - check ethernet cable
exportfs: unknown host or netgroup in access list: lrlsase.lr.tudelft.nl
22:03:00 (lmgrd) -----------------------------------------------
22:03:00 (lmgrd)   Please Note:
22:03:00 (lmgrd) 
22:03:00 (lmgrd)   This log is intended for debug purposes only.
22:03:00 (lmgrd)   There are many details in licensing policies
22:03:00 (lmgrd)   that are not reported in the information logged
22:03:00 (lmgrd)   here, so if you use this log file for any kind
22:03:00 (lmgrd)   of usage reporting you will generally produce
22:03:00 (lmgrd)   incorrect results.
22:03:00 (lmgrd) 
22:03:00 (lmgrd) -----------------------------------------------
22:03:00 (lmgrd) 
22:03:00 (lmgrd) 
22:03:00 (lmgrd) "astro": Not a valid server hostname, exiting.
22:03:00 (lmgrd) Valid server hosts are: "localhost" 
22:03:00 (lmgrd) Using license file "/var/flexlm/license_bakker.dat"
S95availmon: esp chkconfig flag is off. No action.



astro console login: WARNING: module 1 MSC: Module keyswitch turned OFF (shutdown pending)

INIT: New run level: 0
The system is shutting down.
Please wait.
K05availmon: esp chkconfig flag is off. No action.
ALERT: (MAINT-NEEDED):module 1 MSC: Too many over temperature interrupts
ALERT: (MAINT-NEEDED):module 1 MSC: Switching to deferred monitoring mode
Power off started from CPU 2