Uit Hack42
k |
|||
| Regel 8: | Regel 8: | ||
|Status=Werkend | |Status=Werkend | ||
|Location=Het Museum | |Location=Het Museum | ||
| − | |Herkomst= | + | |Herkomst=DND |
|Architecture=MIPS | |Architecture=MIPS | ||
|OS=IRIX | |OS=IRIX | ||
}} | }} | ||
| − | |||
* Deskside server | * Deskside server | ||
* 8 CPU's (195 MHz MIPS R10000) | * 8 CPU's (195 MHz MIPS R10000) | ||
Versie van 1 sep 2014 13:07
| Server: Origin 2000 | |
|---|---|
| Rubriek | Het Museum |
| Fabrikant | 
|
| Model | Origin 2000 |
| Naam | Origin 2000 |
| Type | Server |
| Serial# | |
| Systeem | |
| Architectuur | MIPS |
| Systeembus/interface | |
| OS | IRIX |
| Netwerk | |
| Hostname | |
| IP Address | |
| DECnet Address | |
| MAC Address | |
| Collectiegegevens | |
| Eigenaar | Hack42 |
| Status | Werkend |
| Knowhow | |
| Locatie | Het Museum |
| Label | |
| Herkomst | DND |
| Datum opname collectie | |
| Bekijk alle hardware - Ga naar het Museum - Nieuw item | |
- Deskside server
- 8 CPU's (195 MHz MIPS R10000)
- 2048 Mbyte RAM
- 2 Harddusks (9 Gbyte en 300 Gbyte)
- CDROM speler
Boot log
De machine start op (console port op de achterkant, 9600,n,8,1)
IP27 PROM SGI Version 6.94 built 04:00:43 PM Dec 5, 2001
Testing/Initializing memory ............... DONE
Copying PROM code to memory ............... DONE
Discovering local IO ...................... DONE
Discovering NUMAlink connectivity ......... DONE
Found 6 objects (4 hubs, 2 routers) in 66521 usec
Waiting for peers to complete discovery.... DONE
Global master is /hw/module/1/slot/n1
Testing/Initializing all memory ........... DONE
waiting for node with nic 1303e3 at module 1 slot 2 at global barrier.........
Checking partitioning information ......... DONE
Loading BASEIO prom ....................... DONE
BASEIO PROM Monitor SGI Version 6.94 built 03:59:15 PM Dec 5, 2001 (BE64)
8 CPUs on 4 nodes found.
Installing PROM Device drivers ............
Walking SCSI Adapter 0 (/hw/module/1/slot/io1), (pci id 0)
1+ 2- 3- 4+ 5- 6+ 7- 8- 9- 10- 11- 12- 13- 14- 15- = 3 device(s)
Walking SCSI Adapter 1 (/hw/module/1/slot/io1), (pci id 1)
1- 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 0 device(s)
Initializing PROM Device drivers .......... DONE
Checking hardware inventory ...............
***Warning: Found a different board in module 1, slot n1,
Previous barcode was DWJ073, New barcode is K0004230
***Warning: Found a different board in module 1, slot n2,
Previous barcode was DWJ798, New barcode is DWJ073
***Warning: Found a different board in module 1, slot n3,
Previous barcode was DPL519, New barcode is DWX943
***Warning: Found a different board in module 1, slot n4,
Previous barcode was DWX943, New barcode is DPL519
DONE
**** System Configuration and Diagnostics Summary ****
CONFIG:
No. of NODEs enabled = 4
No. of NODEs disabled = 0
No. of CPUs enabled = 8
No. of CPUs disabled = 0
Mem enabled = 2048 MB
Mem disabled = 0 MB
No. of RTRs enabled = 2
No. of RTRs disabled = 0
DIAG RESULTS:
ALL DIAGS PASSED.
**** End System Configuration and Diagnostics Summary ****
System Maintenance Menu
1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor
Option? 3
Diagnostic program not supported in this configuration.
System Maintenance Menu
1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor
Option? 5
Command Monitor. Type "exit" to return to the menu.
>> hinv
System SGI-IP27
8 195 MHz IP27 Processors
Main memory size: 2048 Mbytes
Integral SCSI controller 0
Integral SCSI controller 1
Integral Fast Ethernet
IOC3 serial port
Disk drive: unit 1 on SCSI Controller 0, (dksc(0,1,0))
Disk drive: unit 4 on SCSI Controller 0, (dksc(0,4,0))
CDROM: unit 6 on SCSI Controller 0, (cdrom(0,6,7))
>> boot
896+111384+16725+3832 entry: 0xa8000000012a6d68
Standalone Shell SGI Version 6.5 ARCS Jan 8, 2002 (64 Bit)
sash: hinv -v
IP27 Node Board, Module 1, Slot n1
ASIC HUB Rev 3, 97.5 MHz, (nasid 0)
Processor A: 195 MHz R10000 Rev 2.6
Secondary Cache 4MB 130MHz Tap 0x9 , (cpu 0)
R10010FPC Rev 2.6
Processor B: 195 MHz R10000 Rev 2.6
Secondary Cache 4MB 130MHz Tap 0x9 , (cpu 1)
R10010FPC Rev 2.6
Memory on board, 320 MBytes (Standard)
Bank 0, 64 MBytes (Standard) <-- (Software Bank 0)
Bank 1, 128 MBytes (Standard)
Bank 2, 128 MBytes (Standard)
IP27 Node Board, Module 1, Slot n2
ASIC HUB Rev 3, 97.5 MHz, (nasid 1)
Processor A: 195 MHz R10000 Rev 2.6
Secondary Cache 4MB 130MHz Tap 0x9 , (cpu 2)
R10010FPC Rev 2.6
Processor B: 195 MHz R10000 Rev 2.6
Secondary Cache 4MB 130MHz Tap 0x9 , (cpu 3)
R10010FPC Rev 2.6
Memory on board, 704 MBytes (Standard)
Bank 0, 64 MBytes (Standard) <-- (Software Bank 0)
Bank 1, 128 MBytes (Standard)
Bank 2, 512 MBytes (Standard)
IP27 Node Board, Module 1, Slot n3
ASIC HUB Rev 3, 97.5 MHz, (nasid 2)
Processor A: 195 MHz R10000 Rev 2.6
Secondary Cache 4MB 130MHz Tap 0x9 , (cpu 4)
R10010FPC Rev 2.6
Processor B: 195 MHz R10000 Rev 2.6
Secondary Cache 4MB 130MHz Tap 0x9 , (cpu 5)
R10010FPC Rev 2.6
Memory on board, 320 MBytes (Standard)
Bank 0, 64 MBytes (Standard) <-- (Software Bank 0)
Bank 1, 128 MBytes (Standard)
Bank 2, 128 MBytes (Standard)
IP27 Node Board, Module 1, Slot n4
ASIC HUB Rev 5, 97.5 MHz, (nasid 3)
Processor A: 195 MHz R10000 Rev 2.6
Secondary Cache 4MB 130MHz Tap 0x9 , (cpu 6)
R10010FPC Rev 2.6
Processor B: 195 MHz R10000 Rev 2.6
Secondary Cache 4MB 130MHz Tap 0x9 , (cpu 7)
R10010FPC Rev 2.6
Memory on board, 704 MBytes (Standard)
Bank 0, 64 MBytes (Standard) <-- (Software Bank 0)
Bank 1, 128 MBytes (Standard)
Bank 2, 512 MBytes (Standard)
BASEIO IO Board, Module 1, Slot io1
ASIC BRIDGE Rev 3, (widget 8)
adapter PCI-SCSI Rev 5, (pci id 0)
peripheral SCSI DISK, ID 1, SGI IBM DNES-309170Y
peripheral SCSI DISK, ID 4, FUJITSU MAT3300NC
peripheral SCSI CDROM, ID 6, TOSHIBA CD-ROM XM-5401TA
adapter PCI-SCSI Rev 5, (pci id 1)
adapter IOC3 Rev 1, (pci id 2)
controller multi function SuperIO
controller Ethernet Rev 1
ASIC ROUTER , Module 1, Slot r1 (nasid 1)
ASIC ROUTER , Module 1, Slot r2 (nasid 3)
ASIC XBOW Rev 2, on midplane of Module 1
MIDPLANE, Module 1 Frequency 390 MHz
ASIC XBOW Rev 2, on midplane of Module 1
sash: boot
3741493+813256+765232 entry: 0xa80000000001a510
IRIX Release 6.5 IP27 Version 01091821 System V - 64 Bit
Copyright 1987-2002 Silicon Graphics, Inc.
All Rights Reserved.
Setting rbaud to 19200
The system is coming up.
WARNING: ef0: link fail - check ethernet cable
exportfs: unknown host or netgroup in access list: lrlsase.lr.tudelft.nl
22:03:00 (lmgrd) -----------------------------------------------
22:03:00 (lmgrd) Please Note:
22:03:00 (lmgrd)
22:03:00 (lmgrd) This log is intended for debug purposes only.
22:03:00 (lmgrd) There are many details in licensing policies
22:03:00 (lmgrd) that are not reported in the information logged
22:03:00 (lmgrd) here, so if you use this log file for any kind
22:03:00 (lmgrd) of usage reporting you will generally produce
22:03:00 (lmgrd) incorrect results.
22:03:00 (lmgrd)
22:03:00 (lmgrd) -----------------------------------------------
22:03:00 (lmgrd)
22:03:00 (lmgrd)
22:03:00 (lmgrd) "astro": Not a valid server hostname, exiting.
22:03:00 (lmgrd) Valid server hosts are: "localhost"
22:03:00 (lmgrd) Using license file "/var/flexlm/license_bakker.dat"
S95availmon: esp chkconfig flag is off. No action.
astro console login: WARNING: module 1 MSC: Module keyswitch turned OFF (shutdown pending)
INIT: New run level: 0
The system is shutting down.
Please wait.
K05availmon: esp chkconfig flag is off. No action.
ALERT: (MAINT-NEEDED):module 1 MSC: Too many over temperature interrupts
ALERT: (MAINT-NEEDED):module 1 MSC: Switching to deferred monitoring mode
Power off started from CPU 2