| Regel 29: | Regel 29: | ||
http://www.old-computers.com/museum/computer.asp?st=1&c=234 | http://www.old-computers.com/museum/computer.asp?st=1&c=234 | ||
| + | |||
| + | |||
| + | == communication == | ||
| + | |||
| + | the Tandy 200 has a db25 serial port on the back. communication is through the TELCOM program in ROM. Open TELCOM. in the top left corner there is a string in the form of 88N1ENI,0 | ||
| + | |||
| + | There could be something else there, but for a 9600BAUD 8n1 communication with xon/xoff and crlf conversion this is the good string. the string can be set by pressing F3:Stat and entering the right string behind it: | ||
| + | |||
| + | <code>Stat 88N1ENI,0</code> | ||
| + | |||
| + | If you prefer a faster speed: 98N1ENI,0 changes it to 19200, the max for this serial port. | ||
| + | |||
| + | |||
| + | To send a file from a pc to the Tandy 200 in linux, set the serial port with stty: | ||
| + | |||
| + | <code>stty -F /dev/ttyS0 9600 ixoff</code> | ||
| + | |||
| + | first op en TELCOM on the Tandy 20 and push F4:Term to open a connection. then push F2:Down to initiate a file download and enter a filename in a 5.2 scheme like text1.do (.do is to make it a textfile for the Tandy editor) and send a file with | ||
| + | <code>$ cat file.txt > dev/ttyS0</code> | ||
| + | |||
| + | during the download "Down" will be visible in reverse. After finishing press F2:Down again to finish the transfer. | ||
| + | |||
| + | Press F8:Bye to disconnect and confirm with y (enter). To return to the main menu, press F8:Menu. You should see the downloaded textfile in the menu. | ||
Versie van 3 jul 2014 16:10
| Laptop: Tandy | |
|---|---|
| Rubriek | Museum |
| Fabrikant | Radio Shack 200x200px |
| Model | TRS-80 Model 200 |
| Naam | Tandy |
| Type | Laptop |
| Serial# | 503400255 |
| Systeem | |
| Architectuur | 8085 |
| Systeembus/interface | |
| OS | |
| Netwerk | |
| Hostname | |
| IP Address | |
| DECnet Address | |
| MAC Address | |
| Collectiegegevens | |
| Eigenaar | Museum |
| Status | Working (nieuwe batterijen nodig, 4x penlite) |
| Knowhow | |
| Locatie | Museum |
| Label | |
| Herkomst | |
| Datum opname collectie | |
| Bekijk alle hardware - Ga naar het Museum - Nieuw item | |
- CPU Intel 80c85
- SPEED 2.4 MHz
- RAM 24 KB (up to 72 KB)
- ROM 72 KB (up to 104 KB)
- TEXT MODES 40 x 16
- GRAPHIC MODES 240 x 128
- COLORS Monochrome display
- SOUND Beeper
- SIZE / WEIGHT 29.41(W) 20.95cm (D) x 5.08 (H) cm / 1.36 kg
- I/O PORTS Parallel printer, Tape, Barcode, Phone, RS232, System Bus
- BUILT IN MEDIA None
- POWER SUPPLY 4 AA alkaline batteries or DC 6V 1.2W center minus adapter (Cat. No. 26-3804)
- PERIPHERALS 3.5 or 5.25 external floppy drive unit, up to 3x24 KB RAM chips, Video interface
- PRICE Original price: $999
http://www.old-computers.com/museum/computer.asp?st=1&c=234
communication
the Tandy 200 has a db25 serial port on the back. communication is through the TELCOM program in ROM. Open TELCOM. in the top left corner there is a string in the form of 88N1ENI,0
There could be something else there, but for a 9600BAUD 8n1 communication with xon/xoff and crlf conversion this is the good string. the string can be set by pressing F3:Stat and entering the right string behind it:
Stat 88N1ENI,0
If you prefer a faster speed: 98N1ENI,0 changes it to 19200, the max for this serial port.
To send a file from a pc to the Tandy 200 in linux, set the serial port with stty:
stty -F /dev/ttyS0 9600 ixoff
first op en TELCOM on the Tandy 20 and push F4:Term to open a connection. then push F2:Down to initiate a file download and enter a filename in a 5.2 scheme like text1.do (.do is to make it a textfile for the Tandy editor) and send a file with
$ cat file.txt > dev/ttyS0
during the download "Down" will be visible in reverse. After finishing press F2:Down again to finish the transfer.
Press F8:Bye to disconnect and confirm with y (enter). To return to the main menu, press F8:Menu. You should see the downloaded textfile in the menu.